Prepared by the Waterproofing Service Editorial Team. Technical reviewer: Joseph Thompson. Last reviewed: October 7, 2026. Last updated: October 29, 2026. This is an independent educational resource; it is not affiliated with, and does not promote, any specific contractor. See Sources below for citations.
Weeping tile is the perforated drain pipe laid around the base of a foundation, beside the footing, that collects groundwater and carries it to a sewer, ditch, dry well or sump pit. It is the Canadian name for a foundation perimeter drain, and it keeps water from building pressure against the basement wall and floor.
Weeping tile does not waterproof a wall. It lowers the water level so there is nothing left to push on it.
Waterproofing Service Editorial Team
How weeping tile works
Early systems used short clay tiles laid end to end with small gaps that let water “weep” in. Modern systems use perforated plastic pipe. Water in the surrounding gravel enters the pipe and flows by gravity to a discharge point. Where gravity cannot do the job, the pipe feeds a sump pit and an automatic sump pump. The City of Toronto describes weeping tiles as pipes “located underground around your home’s foundation” with “small holes that collect groundwater and rainwater to keep it from entering your home.” Relieving that water is what prevents hydrostatic pressure from building against the wall.

Weeping tile vs. French drain: the two terms describe the same gravel-and-pipe idea. “Weeping tile” is the usual Canadian term for the drain at the footing; “French drain” is more common elsewhere in North America and also covers yard drains that have nothing to do with a foundation.
What the Ontario Building Code requires
The Ontario Building Code, Division B, Article 9.14.2.1, requires drainage at the bottom of exterior foundation walls, with stated exceptions (for example, walls that are effectively drained by the native soil or that are shown not to need drainage). The code’s stated intent is to limit moisture loading on foundation walls and basement floors, including hydrostatic pressure. For the drain pipe itself, the City of Greater Sudbury’s building guide, which summarizes the code, lists these requirements:
| Requirement | Summary |
|---|---|
| Minimum pipe size | 100 mm (4 in.) diameter, laid level (9.14.3.2) |
| Cover | At least 150 mm (6 in.) of clear stone or coarse granular material over the top and sides, with no more than 10% passing a 4 mm sieve and no pyritic material (9.14.3.3) |
| Filter layer | Geotextile over the granular material (or filter cloth over clay tile) (9.14.3.3) |
| Where gravity drainage is not possible | A sump removes water from the foundation (9.14.5.2) |
These article numbers come from a guide to the 2010 code. The current code is O. Reg. 163/24, and numbering and wording can change between editions, so confirm each requirement against the current code and with your local building department. Other provinces apply their own codes; this table is Ontario-specific.
Signs weeping tile may have failed
The City of Toronto advises checking basement corners regularly: if the floor is damp or wet, the weeping tiles “may not be working properly and may need to be repaired or replaced.” Other signs include a sump pump that runs far more than it used to, white mineral deposits on the wall (see efflorescence), and water at the wall-floor joint after heavy rain. Toronto also notes that weeping tile connected to the sewer system should be disconnected and a sump pump and/or backwater valve installed, using a licensed plumber.
The City of Toronto publishes a free video series on flood-proofing a home, including weeping tiles and sump pumps: How to Flood-Protect Your Home (City of Toronto, YouTube playlist).
Frequently Asked Questions
Does every house have weeping tile?
No. Many older homes have clay tile that has clogged or collapsed, and some have none. The Ontario Building Code also allows exceptions where drainage is shown to be unnecessary, such as walls effectively drained by the native soil. Whether a specific house has working weeping tile depends on its age, the original builder and any past repairs. A licensed plumber or drain contractor can confirm this with a camera inspection, and a building department may hold permit records for the property.
Can weeping tile be connected to the sewer?
In some older Ontario homes it is, but the City of Toronto advises against it. Toronto recommends disconnecting weeping tile from the sanitary sewer and installing a sump pump and/or backwater valve, using a licensed plumber. A connected drain can send groundwater into the sewer system during heavy rain, which adds to the load that causes sewer backups. Check your municipality’s rules and any available subsidy before starting work.
How long does weeping tile last?
There is no single reliable figure, and we have not found an authoritative Canadian source for one, so we do not give a number. Lifespan depends on pipe material, whether filter fabric was installed, soil type, tree roots and how well the system has been maintained. Old clay tile and unwrapped pipe are the most prone to clogging. If your basement shows the warning signs above, have the drain inspected by camera rather than relying on its age.
See Also
- What Is a French Drain?
- What Is a Sump Pump?
- What Is Hydrostatic Pressure?
- Why Is My Basement Leaking? Causes, Costs & Fixes
- Exterior Waterproofing: The Complete Guide
- Browse the full glossary
Sources
- City of Greater Sudbury, Weeping Tile and Sump Pit Guide (includes excerpts of the 2010 Ontario Code and Construction Guide, Foundation and Surface Drainage): pipe size, stone cover, geotextile
- National Research Council Canada, building code intent statements: intent and exceptions for foundation wall drainage
- O. Reg. 163/24, Building Code (e-Laws): current Ontario code; verify article numbers here
- City of Toronto, “How to Prevent Basement Flooding” (page modified April 17, 2026)